EKO 5510

The eko 5510 introduces simple elegance with the addition of the ultra reliable ribbon burner. Choose from a range of selected frets to personalise your fire.

Of course this fire does not require a chimney or flue. All the heat is distributed into the room, therefore none is lost up the chimney. A 43mm spacer frame is fitted as standard to minimise fitting depth and maximise on installation possibilities. The only considerations when installing this appliance are a minimum room size of 27m³, an accessible gas supply and adequate ventilation.

Specifications

Minimum Room Size	27m3
Fire Type	Flueless Inset Pi27G
Efficiency	100%
Control Type	Manual Rotary
Heat Input (Max/Min) Gross	2.3kw / 1.3KW
Heat Output (Max/Min) Gross	2.3KW / 1.3KW
Running Costs Per Hour (Max/Min)*	9.82p /5.55p
Outline Dimensions**	W495 X H620 X D210 (mm)
Installation	Inset - Fireplace
Air Vent Required	100cm2
Safety	Oxygen Depletion Sensor Flame Failure Device Catalytic convector Glass fronted
Options	N/A